18mm Screw Thread 20ml Headspace Vial with Label Area Chemistry

Autosampler Vials. Thermo Scientific™ 20 mm Headspace Vials, Septum, and Caps. Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish. Headspace vials, septum, and caps can be purchased in various quantities separately or together as

Headspace vials and closures must form a tight seal for accurate analysis with reproducible results. Available in clear or amber Type I borosilicate glass with crimp or screw thread finishes. The vials are used to heat the sample until the concentration of the liquid and gas phases are in equilibrium.

Dec 18, 2011 · DESCRIPTION 10mL Clear Glass Screw Vial, 23 x 46mm, 18-425 10mL Amber Headspace Glass Screw Vial, 23 x 46mm, 18-425 20mL Clear Headspace Glass Screw Vial, 23 x 75mm, 18-425 20mL Amber Headspace

Autosampler Vial, 2ml HPLC Vial, Amber Lab Vial, Sample Vial with Writing Area, 9-425 Screw-Thread Vial, Blue Screw Cap with Hole, White PTFE & Red Silicone Septa 100 Pack by Alberts Filter (2 Packs) Vial Rack, Single Blue Holds 50 Standard 12 mm 2 mL vials, Stackable Tube Rack Centrifuge Tubes Rack

Use these 11 mm clear glass vials with snap caps or aluminum crimp seal closures. Vials are available in 10mL and 20mL usable volumes with screw thread closure styles that require no tools for closure. Minimize contamination from handling with pre-assembled caps and septa; compatible with most HPLC and GC autosamplers.

3 Layer Septa. Hamilton. Three Layer Septa is made of preconditioned silicone rubber and is 3.81 mm (0.150 in.) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 200° C. Preconditioned silicone rubber septa, 3.81 mm (0.15“) thick .

The precision thread vials features a thread with multiple screw turns which forces the septa against the vial to form a gastight seal. The screw thread guarantees the cap fits with a flat surface every time which ensures that the vial does not drop off the system magnet. Precision thread vials are compatible with 18 mm magnetic screw caps.

The precision thread vials features a thread with multiple screw turns which forces the septa against the vial to form a gastight seal. The screw thread guarantees the cap fits with a flat surface every time which ensures that the vial does not drop off the system magnet. Precision thread vials are compatible with 18 mm magnetic screw caps.

China Aijiren 20ml Amber Clear HPLC Precision Thread Glass Headspace Vial, Find details about China Screw Headspace Vial, 20ml Screw Headspace Vial from Aijiren 20ml Amber Clear HPLC Precision Thread Glass Headspace Vial - Zhejiang Aijiren Technologies Co., Ltd.

Alternatives may be available by searching with the VWR Catalogue Number listed above. If you need further assistance, please call VWR Customer Service on 0800 22 33 44. Headspace screw neck vials with precision thread, ND18 (only suitable for magnetic caps) Type. Capacity.

9-425 Screw Thread Vial with Label. Blue 9-425 Open Top Ribbed Screw Cap with 9mm Red PTFE/White Silicone Septa 1mm Thick (UltraClean). 2mL Amber Glass 12x32mm Flat Base 9-425 Screw Thread Vial with Label. Blue 9-425 Open Top Ribbed Screw Cap with 9mm Red PTFE/White Silicone Septa 1mm Thick (UltraClean). Ref.No. C0001170 C0001172 Description

Chemglass 135mm round top ANALOG hot plate stirrer system. Hotplates feature many exclusive features and improved safety enhancements. The 135mm diameter heater top is scratchproof and chemically-resistant. The back corner of the housing has an M8 female thread to accept a vertical support rod.

Clear - Alberts Filter HPLC Vial, Autosampler Vial, 2ml Vial, Lab Vial with Writing Area, 8-425 Screw-Thread Vial, Black Screw Cap with Hole, Red Headspace Vial 10ml, Borosilicate Glass Flat Bottom Lab Vial with Magnetic 18mm Screw Top for 10ml/20ml, White Silicon + Blue PTFE, 100...

Limited-Volume 2.0 mL, 9 mm Screw-Thread Polypropylene Vials. Restek. Fit all 2.0 mL, 12 x 32 mm, vial-based autosamplers. Compatible with all 9 mm screw-thread caps. PTFE-free—ideal for PFAS analysis (e.g., EPA 537) and other PFAS-sensitive methods. Related Products: 2 Ml Autosampler Vials.

Brand new 18mm screw headspace glass vials for lab test Aijiren 10-20mL 18mm Screw Thread Headspace ND18 10-20mL 18mm Screw Thread Headspace ND18. 10mL & 20mL screw neck ND18 rounded bottom headspace vials with matched 18mm magnetic precision screw metal caps,