18mm Magnetic Screw-Thread Cap w/PTFE/Blue Chlorobutyl 125-pk. 22799 $47 Headspace Vials, Caps, and Seals 20mm Crimp-Top and 18mm Screw-Top Headspace Vials † 6, 10, 20, and 27mL vials available with 20mm crimp-seal finish. † 10 and 20mL screw-top vials available with 18mm screw-thread finish.
This cap allows direct injection of a liquid by means of a syringe through a center hole on the cap and a rubber septum with PTFE lining. For use with 20 mL glass (part number 6000128) or plastic (part number 6001085) vials.
9mm Clear Glass Screw Thread Vials are 2mL, 12x32mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time.
Search results for gc vials at Sigma-Aldrich. Center Drain (CD) screw thread vials with hole caps and PTFE/silicone septa. ... Inserts for 15×45 mm Vials.
Caplugs offers a full range of plastic caps to protect fabricated components or serve as finishing parts that remain on products. Browse tapered caps , threaded & non-threaded caps, vinyl & more.
6 IDENTIFICATION Step-by-Step Identification Procedure for Threads and End Connections Step 1: Determine if the thread is tapered or straight (parallel) . Step 2: Measure the thread diameter .
Fisherbrand™ Certified Vial Kit 9mm short thread, Amber Glass, 1.5mL, PP Screw Cap, Center hole, Silicone/PTFE septum Certified Kit, Includes 100 vials and 100 caps with pre-assembled septa. 53.95 € - 59.82 €
(5.5 mm) hole at each drill point on mounting boards Object Width Add 2" (50 mm) outside Drill 7/32" (5.5 mm) hole at each outside point MOUNTING BOARD 2" (50 mm) 2" (50 mm) Drill Hole Point Drill Hole Pigtail Lag Screw Holes Point DIAGRAM 8. Install a Pigtail Lag Screw (B) in each hole. Threads should just disappear into mounting board.
9mm Screw cap and Septa . P/N. Descriptions. Qty/pk. 120907. 9mm PP screw thread cap, Blue center hole with Red PTFE/White Silicone septa. 100/pk. 120908. 9mm PP screw thread cap, Blue center hole with White PTFE/Red Silicone septa. 100/pk. 120909. 9mm PP screw thread cap centre hole, 6mm . 100/pk. 120910. Septa Red PTFE/White Silicone, 9 x 1mm
Autosampler Vials, Membrane Solutions 2ml HPLC Vials, 9-425 Lab Clear Vials with Write-on Spot and Graduations, 9mm Blue ABS Screw Caps & Septa for GC Sample Vials, 100 Pcs 4.6 out of 5 stars 71 Clear Vial & Red PTFE septa
Microscale, thin-wall reaction vial with outer joint externally threaded at opening to allow an O-RING-CAP-SEAL ground glass connection similar to 9590. Major difference is this thin-walled vial has better heat transfer for the more demanding research project.
SureStop vials are designed as part of the Advance Vial Closure System (AVCS) and remove any subjectivity around achieving the optimal seal compression when closing a vial. Below are 2mL, 12x32mm vials in clear and amber glass with 9mm screw thread vials for use with AVCS caps to provide the ultimate in sample security
Autosampler Vials and Vial Sets Thermo Scientific™ 20 mm Headspace Vials, Septum, and Caps Headspace vials are available in clear or amber glass with a round or flat base, a crimp seal with a beveled or square edge finish, or with a screw-thread finish.
Burndy manufactures connectors for splicing, tapping, terminating, conducting or grounding, and provides certification and testing of tool and connector products
Certified CD™ Vial (Center Draining) Kit, 9 mm thread with cap/septa, unassembled volume 1.5 mL, clear glass vial, PTFE/silicone, pkg of 100 ea; find Supelco-29307-U MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich.
English
中文简体